Best Cold Saw

Best Cold Saw. A chop saw is a fast way to cut metallic material. It will get the job done quickly and cleanly, but it’s important that you choose the right one.

You have to make sure that it will fit your needs for cutting metal pipes and tubes as well as flat stock, easily and effectively.

There are a few things you have to have in mind when looking for a chop saw as well. For example, choosing the correct voltage is crucial.

If you’re going to be doing larger projects that require more energy and thus more power to start with, you should opt for a deep-welled chop saw which will allow you greater access while being able to accommodate larger pieces of material.

 7 Best Cold Saw

1. SKIL 15 Amp 7-1/4 Inch Circular Saw

SKIL Circular Saw boasts a powerful motor that delivers up to 5,300 RPM along with a 7-1/4-inch carbide tipped blade for greater speed and faster cuts.

This saw features tool free spindle lock for adding or removing blades, as well as positive stops at 45 and 51 degrees for a wide variety of cuts.

The dust blower keeps the line of cut clear during cutting to prevent wood from obstructing the view, making it easier to see what you’re doing.

Additionally this saw has an anti-stall feature with an electric brake assuring more control when cutting near materials that are difficult to cut through and a safety switch which prevents accidental starts.

For those who are seeking to expand their toolbox a bit further and who have better skill overall, there’s the SKIL 5280 7-1/4 inches circular saw.

It includes features typically only found in higher-end models but with the cost of a basic circular saw, making this model an excellent value.

For example, there’s plenty of power when it comes to cutting as well as finer control over your projects. It doesn’t matter whether you’re using sheet goods or wood for various purposes such as building furniture or patio furniture.

The SKIL 5280 will make very precise cuts without leaving any jagged edges behind due to its laser guide feature that makes sure everything is quite accurate and clean.

2. Worx WX429L 4 Amp WORXSAW

If you need to cut through 2×4 lumber quickly, the WORX Electric Compact Circular Saw is the best option for your needs.

It has 0-45 degree bevel settings which allows for greater precision when cutting lumber and helps eliminate a lot of unnecessary waste.

But that’s not all – it also cuts metal, tile, and plastic with relative ease. The left-sided blade optimization is one of the things that makes this tool so special because unlike most circular saws it allows you to see exactly where you’re cutting.

So it’s easy to line everything up perfectly! This model also benefits homeowners who are on a budget but still want quality tools that won’t let them down after only having them for a short amount of time.

When comparing a 7-1/4″ circular saw to a Worxsaw with its 4-1/2″ blade, the 7-1/4″ saw is heavier. It’s much wider to accommodate the larger blade and this makes it more cumbersome and harder for some users to control.

It shreds users’ nerves when they have to strain so hard to push a heavy tool through the material, especially when it means making delicate and precise cuts that require caution and concentration.

As an advantage also, since the Worxsaw is smaller, it weighs less than a regular saw powered by electricity. As a result, there will be more speed.

Because you’ll be able to work longer before getting exhausted from the effort needed for operating a relatively heavier stationary power tool motor OR even multiple tools simultaneously.

3. DEWALT Sliding Compound Miter Saw

DEWALT Sliding Compound Miter Saw comes with lots of miter detect plate choices. With tall sliding fencing that holds 6-3/4″ crossing at 90 degrees and 2-inch x 10″ cross at 45 degrees for 12″ complex blade saws, it also has a bevel degree of 0-48 on the left and right sides.

Tall sliding fences support a 6-3/4-inch base vertically, the cam lock miter handle lets the operator work quickly, accurately, and easily. In addition, it features a precision miter system machined base fence support.

Longitudinal ball bearings and dual horizontal steel rails with an innovative clamping mechanism to increase its performance in providing accuracy.

DEWALT is a long name as compared to Dewalt but they make awesome tools; they offer so many choices such as this one that provides durability, stability, precision and also powerful cutting capabilities.

With a high visibility bevel scale and positive stops, this sliding compound miter saw delivers enhanced accuracy for everyday jobsite use.

The DEWALT DWS779 15 Amp 3800 RPM motor achieves a long run time with up to 3x more durability than typical motors thanks to it’s unique Armored V-belt design that protects against drops, impacts, and abrasive materials.

4. Metabo HPT 10-Inch Compound Miter Saw

This innovative saw makes the process of crosscutting and mitering materials quicker and easier. The 10 Inch Miter Saw weighs only 24.2 pounds, which means it’s lightweight enough for easy transport but still powerful enough to make tough cutting jobs easy.

It’s like driving an automatic Maserati,  it goes fast and smooth but requires an experienced driver who knows how to control a vehicle that will take them places they never knew possible.

Here are some of the ways in which this model excels: It’s lighter than previous models at just 24.2 pounds; Has a large table with a vice clamping system to hold your work piece safely in place.

And most importantly, it has a 15 Amp motor that generates a no-load speed of 5500 RPM just so you can take on those hard cutting projects. The positive stops of the thumb allow for simple miter adjustments.

To deliver smooth and reliable angle cuts, the bevel has to have a length of 45 degrees to the left., and is perfect for versatile projects ranging anywhere from picture frames to cabinet boxes.

An extended fence flips up to 4 inches with a large work surface that allows you to create larger projects like room dividers and shelving units.

While an included dust collection attachment keeps your workspace tidy while deflecting debris towards the dust collector which attaches easily to either side of the miter saw table.

Powerful enough for tough cutting jobs, this miter saw delivers high power with its one thousand watt motor. Comes with a clamping system to securely hold your material and vice for better material support during cutting procedures.

5. PORTER-CABLE Chop Saw

PORTER-CABLE Chop Saw comes standard with a 5 Amp motor that runs at 3,800 RPM. The chop saw features durable metal body construction and includes free cutting wheels for optimal use.

PORTER-CABLE 14 A Chop Saw can cut straight on any surface as it is equipped with a convenient miter adjustment. This model’s power and speed makes it safe to work with.

There are no exposed parts once the belt cover is removed and screws are out, making this unit ideal for clean cuts without getting in the way of your line of vision while cutting.

The 14-inch chop saw is ideal for various materials including wood, plastic, lattice material, pipe and much more. Long life brushes are replaceable and serviceable facilitating durability through low maintenance.

The PORTER-CABLE Chop Saw is equipped with a quick release material clamp which allows users to adjust the cutting length of their material and make room for quick removal after finishing cutting.

It also comes with a cutting fence which can be adjusted to allow up to 45 degree angle cuts, thus supplying you with the means needed to effectively make long, straight slits that could not only decrease your time of completion but also help maintain accuracy in your projects.

The spark deflector helps keep you safe while cutting since it provides a clear line-of-sight on the blade so you are aware of potential harm from flying debris or large pieces of wood.

Furthermore, the cut-off saw features a spindle lock so that once you remove the blade, you don’t have to worry about resetting your saw for use again time.

6. SKILSAW SPT84-01 14-Inch Abrasive Cut

The 14 in. Professional Saw cuts through boards like magic in a comfortably holdable package. This handy powered tool is lightweight, portable and easy to use.

It’s got smart features you not find anywhere else – with the comfortable, ergonomic handle eliminating the need for a separate wrench or any other additional assembly apart from putting on the blade itself.

And get this: if you feel like installing any of the dozens upon dozens of specialized blades that are available, it all takes less than one minute because this section.

Here – swivels out for all your adjustments and has an integrated drill bit guide so you can sharpen your edges until they release stream after stream of whatever fluids operate your heavy machinery.

So don’t be fooled by the rest when getting into hard-core action like cleaving into hard woods and cutting thick planks (80mm) – just sink your teeth into it because once you do so, oh boy, then will you see why we’re bringing home awards by the box full.

The legendary strength and grit of a skill saw are now available for your metal cutting needs! This lean, mean chop saw for metal, is as powerful as it looks, weighing in at 34 pounds.

The 14″ Abrasive Chop Saw boasts an impressively lightweight design which makes it perfect for going from job site to truck. Nevertheless, this unit packs a powerful punch by giving you just what you need to cut through metal.

It features the perfect balance of size and power that allows you to carry it with ease on and off job sites. This device acts as a portable metal cutting workshop wherever you take it thanks to its reliable D handle comfort and control. Forget about carrying around bulky saws any longer.

7. Evolution Power Tools Best Cold Saw

Evolution Power Tools Steel is a dry metal cutting chop saw; this saw, which cuts metal with minimal heat or sparks and doesn’t require coolant, is perfect for a wide variety of applications.

This 1800 watt / 15 amp motor with high torque gearbox respects the environment and also helps to reduce motor load and improve steel cutting performance.

The heavy duty cast aluminum base ensures this tool will be used for many years without breaking down or slowing down. Cutting through metal has never been easier.

This product outperforms abrasive saws that leave large amounts of dust in the air: faster cutting and long blade life the manufacturer notes that 1000 cuts can be achieved in mild steel 2 inches by 2 inches.

The Evolution Evosaw380 15″ Chop Saw is an upgrade of the Steelsaw2 which has been discontinued. It comes with both a cutting blade and V-block, holds the work steady with a clamping handle, and includes a kit that includes extra carbon brushes for coming revision.

The Evosaw380 makes your cuts easier on you by allowing quick action thus allowing it to cut cold without cooling fluids needed. Because the saw is able to cut steel without heating up, you can work around it immediately upon completion of your project.

This chop saw is ideal for use in cutting plate steel, angle iron, square tube, pipe, and metal roofing as well as other projects that require gentle maneuvering where sparks are prone to cause dangerous accidents.

Conclusion

Best Cold Saw. When cutting metal, you may want to invest in a cold saw. The four options featured here are superb choices for a variety of cut types, especially considering your needs. While all these saws feature blades that are durable, they also vary depending on which requirements you have for your particular project.

Related Guides

• Best chop saw
• Miter saw reviews consumer reports
• How To Cut Tile Without A Wet Saw