How Often To Change Grease In Kitchenaid Mixer

How Often To Change Grease In Kitchenaid Mixer. Even though a KitchenAid mixer can be a great aid in the kitchen, its moving parts could begin to slow down without regular use. In the case of grease drips on the casing and is left there long enough, it can actually damage the casing.

Make sure to wipe off any excess oil before turning the machine back on. In addition, clean up any splashes thoroughly to prevent them from building up and becoming difficult to remove in the future.

How Often To Change Grease In Kitchenaid Mixerchange grease in kitchenaid mixer

In case you decide to tune up your KitchenAid mixer on your own, be sure to use only food-safe grease. Once a year, you can easily replace the grease by removing the top of the motorhead, and greasing each gear individually; however, you may void the warranty if you disassemble the machine.

We will discuss how often to replace the grease in the KitchenAid mixer in this article.

Step 1: Disassemble Mixer

Unplug the mixer before using it. Detach the model’s back cover. Getting rid of the metallic strip you’ll notice around your device’s head is essential.

Take off the ring around the head. If you are unsure about something, read the instructions carefully to find out what part it is. The 5 screws behind your cover, as well as 4 additional screws and nuts below the mixer head, must be removed.

Step 2: Apply Grease

Check the gears to ensure they are still sharp and well-maintained. Apply fresh grease to any parts that are exposed. Be sure to make a complete spectacle of the greasing process so as to ensure you have included every nook, cranny, and hole with proper lubrication.

When you feel like everything that can be greased has been properly greased, you will now take on the task of putting together both the upper and lower heads again.

This is how you will be able to get your mixing device back into top shape again.

Step 3: Reassemble Mixer

Finally, your stand mixer should resemble what it looked like before you disassembled it. While it may seem daunting to take apart a stand mixer, it’s actually not that hard.

By putting each screw in one at a time, you can easily put all the components back in place and have them fit perfectly. Attach your strain relief cord to your metal strip after the planetary cover is back on and add your rear cover lastly.

You’ve now done the job of fixing your KitchenAid stand mixer it will now operate just like normal.

Grease Reasons For Kitchenaid Mixers

When you notice something strange about your KitchenAid Mixer, you’re encouraged to clean it. Whether a mixer is squeaking or leaking oil, the only way to stop it is to replace the grease and this can be done easily by yourself.

A scratching noise or other bizarre sounds emanating from your mixer suggest that you need to brush it up as well as clean using a suitable cleaner in order to maintain its performance at full efficiency in the same way that simply greasing does for machines out of commission for extended periods of time.


My KitchenAid keeps jumping. How can I stop this?

First, determine if your mixer is standing on a solid surface before mixing. If it’s on the moveable tread of a rolling cart you might find the mixing results quite wonky.

It may be because the hinge has loosened or because the screw that connects to the metal pin where the hinge attaches towards the head of the mixer might not be tightened enough.

KitchenAid mixers consume how much grease?

There are 3.5 ounces of oil or grease that can be mixed in with the KitchenAid mixer per minute, which means that 2 cups of oil are capable of mixing in with it within an hour.

Related Guides