How To Fix A Scratched Mirror. Scratches on a mirror’s surface can be quite distracting, but it is possible to restore the mirror to its previous condition using a silver spray or simple home ingredients.
There are many different kinds of scratches that exist; some are deep and need more than just a simple cleaning with soap and water whereas others are more superficial.
But if you want your bathroom mirrors to shine as brightly as before, then we’re going to cover everything you need to know about removing those unsightly scratch marks safely at home.
How To Fix A Scratched Mirror
Rub the mirror with toothpaste to run a polishing cloth over it. The polishing compound will help relieve the problem or apply a clear coat of nail polish to set it in place.
You can also try rubbing a mustard or vinegar paste over the smashed part of the mirror.
Step 1: Applying Oil
Apply the oil with just enough pressure to fill in any scratches by using a soft cloth, cotton balls, or a towel with caution.
Be gentle while doing this, Avoid too much force. The goal is both of you will come out looking great after the process.
Step 2: Let It Dry
After you have covered all scratched areas, let it sit for about an hour in a dry place. If you wish, you can leave it overnight. Finally, use your cloth, cotton balls, or towels to wipe away the oils again.
Put some warm pressure on the scratched areas if it still doesn’t come off easily even with warm moisture. When your time is limited, you can speed up the drying process by using a hairdryer.
Step 3: Again Apply Oil
You should apply a second coat of oil over any new scratches that weren’t visible before but are now more visible after applying the oil.
There is no need to apply oil more than twice or three times so that all treatment areas receive an oil application with no gaps left uncovered, as long as you take care not to go overboard and re-create these unwanted marks on your glass finish.
Step 4: Clean Mirror
To finish, your mirror will need to be cleaned with a glass cleaner, and any fingerprints or oils from your hands will need to be wiped off before they dry.
It will also need to be allowed to cure for a minimum of 10 minutes before you start using it again. If you do this, you will be able to keep it looking like new for a very long time.
Another Method
This article discusses a different way to repair mirror scratches.
Toothpaste: Toothpaste is an ideal solution for cleaning scratches out of your mirror. Be sure to use toothpaste for the best results and not gel.
Dunk a small amount into the problem area and rub it in with your fingers to ensure consistency. Following this, use a soft cloth to wipe away the toothpaste from that spot.
The scratch should go away under scrutiny but if it doesn’t you can repeat the process until it’s gone.
Mustard And Vinegar: Another method to reduce the appearance of scratches on your mirror is by using household items you may already have.
Mix equal measurements of dry mustard and vinegar together in a bowl to form a paste-like substance. Apply this solution to the damaged sections of your mirror with a clean cloth or cotton swab.
Apply circular motions with the solution you applied in order to buff out the scratch with any abrasive. Inspect if all traces of your scratch are gone from your glass.
If needed, repeat this process until it has been eliminated entirely.
FAQs
Does it matter if a mirror has a scratch on the back?
Use a generous amount of toothpaste over the scratch for about 15 minutes to remove it. This technique might leave some white marks on the scratched area, but these will likely come off after a few minutes.
If needed repeat steps 1 or 2 until the scratch has been completely removed and any excess toothpaste has been rubbed off.
Do you have the ability to resurface mirrors?
There is no doubt that this is the most complex solution to the problem.
It’s important to note that remedy has multiple meanings here, which is why I err on the side of caution and explain that it’s also more than simply removing the problematic component and reapplying those layers again.
Related Guides