How To Lower PH In Hot Tub

How To Lower PH In Hot Tub. Hot tubs do need a certain degree of maintenance. The water levels easily alter when not properly balanced and sanitized.

When the water is either too alkaline or acidic, it can be lowered by using an acid chemical to help return balance to the water. This is done by introducing chemicals into the hot tub liquid formula so as to bring it back to its normal pH level.

To learn more about maintaining the proper balance in hot tub water and what steps you should take regarding cleaning.

How To Lower PH In Hot Tub

The following is an article on lowering the PH in a hot tub.

Step 1

Make sure the total alkalinity of your water is the first thing you measure. Since pH drops faster than alkalinity, you should focus your efforts on alkalinity first. The pH will gradually double down and then adjust to it once you balance the alkalinity.

Step 2

Combine the chemicals with a small quantity of water. You can scoop out two cups of water at a time from your hot tub and place it in a beer cooler until it’s three-quarters full. To dissolve the organic bromine or polyquat, add 50 ml or 2 tbsp of it into the water in the bucket.

Step 3

Light up your hot tub. Verify that the pump and filters are working effectively. In order to avoid burning yourself, you need to set your hot tub’s temperature at its usual level. This is also more pleasant.

Step 4

Fill the hot tub with the diluted chemical. Fill the spa with a slow stream of chemicals diluted in water. Watch the water for a while.

You can let the pump circulate the water for three to six hours following the addition of the cup of decreased. Using four cups for a square hot tub, five cups for a rectangular hot tub, and so on.

Step 5

Check the alkalinity and pH again. Testing for alkalinity should be done first, followed by testing for pH. If done correctly, the pH should already be balanced.

You can use an increase in calcium available to add to compensate for a low or high pH if the pH is not balanced yet.

Step 6

Water should be periodically drained. At least once every four months to six months, you should drain your hot tub completely. Before refilling with fresh, filtered water, make sure all mold and mildew are removed.

During the next few weeks, treat your hot tub with an anti-mold product before continuing to monitor its condition. You can do this to keep your hot tub in good shape when it is not in use and ensure that it is ready for you when you need it.

FAQs

What happens if the pH is too high in the hot tub?